The dryer provides the easiest way of drying our clothes, and our daily routine gets affected when there is a problem with the machine. Ideally, when troubleshooting the problems with your dryer, you should get help from the dryer technician. However, there are certain problems that you can handle without professional help. If the dryer is not tumbling, you could check some of the parts which can be the source of the problem. Once you identify the problem, replacing or repairing it should solve the problem. If the problem persists, it is best to get help from dryer service technician. Here are some of the parts you must check when the dryer is not working.
Belt
The belt, which connects the motor to the drum, helps in rotating the drum. Regular use of the machine can wear out the belt or make it brittle. If the dryer is not tumbling, the first part you must check is the belt. If the belt is broken or worn out, replace it immediately. To replace the belt, you must disconnect the machine from its power supply and remove the front panel.
Pulley Assembly
The idler pulley assembly provides tension on the belt, so it does not slip when the dryer has a load in it. The pulley continuously rotates at high speed, and over time, it may get damaged due to increased friction. If you hear a squealing or squeaking sound when the drum rotates, it means that you may have to repair or replace idler pulley assembly.
Another symptom of a problem in the idler pulley assembly is the extremely slow or non-tumble condition of the drum. When the belt is removed, the pulley should turn freely on the machine shaft. When checking the status of the idler pulley, make sure you test the shaft for signs of wear and tear. If the shaft appears to be damaged, replace it immediately. The shaft and the pulley are usually located near the drive motor. To service these parts, you have to remove the front access or the lower access panel of the machine.
Drive Motor
This is the part of your dryer that is responsible for rotating the dryer the blower and the drum. If there is a problem with the motor, the appliance may not tumble or start. The drive motor sometimes produces a whirring sound to indicate that the winding of the motor is faulty. To visually check the drum, you will need to remove the dryer’s front panel first. Since this is a live voltage test, make sure to contact a qualified dryer repairman.
Maintenance Kit
Most manufacturers produce a kit that contains parts which may fail with regular use. Some of the parts that are included in the kit are idler pulley, belts, bearings, and drum rollers. So if you are looking at ways of reducing part replacement expenses, you should get this kit.
Door Switch
The door switch allows the machine to tumble only when the dryer door is closed. If the door is closed and the machine does not tumble, then the door switch is defective. The switch is typically located behind the front panel of the dryer. This switch is ideally tested using a multi-tester. The test must be conducted after disconnecting dyer from its power supply.
If these steps don’t help in solving the problem with your home appliance, it is best to call a dryer repair technician. The technician will visit your house to repair and service the dryer. They have several years of experience in repairing household appliances and will fix the appliance in the shortest possible time.
More Palm Beach County Locations We Service:
Palm Springs, Dryer Repair in West Palm Beach, Royal Palm Beach, Boca Raton Bosch Appliance Repair, Delray Beach, Boynton Beach, Lake Worth, Palm Beach Gardens, Lantana, Greenacres, Riviera Beach, Wellington, Jupiter